When you bring a bike in for work, first we will inspect and detail any faults and advise you of repair options and costs before the work is carried out.
Individual Job Prices
|
|---|
Fitting Single Gear Cable*
| Free
|
Fitting Full Cable set*
| £5
|
Set Gears*
| £10
|
Tyre Fitting (each)*
| £5
|
Set Front and Rear Brakes*
| £10
|
Bottom Bracket Fitting*
| £15
|
Wheel True*
| £15
|
Hub Servicing (each)*
| £15
|
Disc Brake Bleeding (each)*
| £15
|
Headset Fitting*
| £20
|
* Excludes costs of parts
Service Details
A Service
* Set up brakes and Adjust.
* Set up Gears (include new gear cable)
* Adjust headset.
* Check Tyres for wear and inflate to correct pressure.
* Check Bottom bracket for wear.
* Adjust wheel bearings.
* Clean and Lubricate Chain.
* Full Bike Check for tightness of bolts.
* Prepare of report sheet.
Cost = £25 = 1 hr work
B Service
* Strip down, clean and lubricate and refit new gear cables.
* Adjust headset, including re-grease.
* True wheels, retention spokes.
* Check Tyres for wear and inflate to correct pressure.
* Remove Front/Rear Mechanicals Clean, Lubricate and Refit.
* Remove Chain and Cassette, check for wear.
* If fitted with cantilever of v-brakes, Strip down Calliper, Re-grease and reassemble. If Equipped with disc brakes remove pads and clean calliper, disc, and check pads for wear, reassemble and respace if required.
* Full Bike Check for tightness of bolts.
* Prepare of report sheet.
Cost = £50 = 2 hour work
C Service
* Strip down, clean and lubricate and refit new gear cables.
* Adjust headset, including re-grease.
* True wheels, retention spokes.
* Check Tyres for wear and inflate to correct pressure.
* Strip down wheels hubs, clean and Regrease.
* Remove Front/Rear Mechanicals Clean, Lubricate and Refit.
* Remove Crank Arms, Chain and Cassette, Clean, Check for wear and refit.
* If fitted with cantilever of v-brakes, Strip down Calliper, Re-grease and reassemble including new brake Cable. If Equipped with disc brakes remove pads and clean calliper, disc, and pads (check pads for wear). Clean and lubricate pistons system, re-bled and re-spacing calliper.
* Full Bike Check for tightness of bolts.
* Preparation of report sheet.
Cost = £75 = 2.5 hours work