When you bring a bike in for work, first we will inspect and detail any faults and advise you of repair options and costs before the work is carried out.
| Individual Job Prices | |
|---|---|
| Fitting Single Gear Cable* | Free |
| Fitting Full Cable set* | £5 |
| Set Gears* | £10 |
| Tyre Fitting (each)* | £5 |
| Set Front and Rear Brakes* | £10 |
| Bottom Bracket Fitting* | £15 |
| Wheel True* | £15 |
| Hub Servicing (each)* | £15 |
| Disc Brake Bleeding (each)* | £15 |
| Headset Fitting* | £20 |
* Excludes costs of parts
Service Details
A Service
* Set up brakes and Adjust.
* Set up Gears (include new gear cable)
* Adjust headset.
* Check Tyres for wear and inflate to correct pressure.
* Check Bottom bracket for wear.
* Adjust wheel bearings.
* Clean and Lubricate Chain.
* Full Bike Check for tightness of bolts.
* Prepare of report sheet.
Cost = £25 = 1 hr work
B Service
* Strip down, clean and lubricate and refit new gear cables.
* Adjust headset, including re-grease.
* True wheels, retention spokes.
* Check Tyres for wear and inflate to correct pressure.
* Remove Front/Rear Mechanicals Clean, Lubricate and Refit.
* Remove Chain and Cassette, check for wear.
* If fitted with cantilever of v-brakes, Strip down Calliper, Re-grease and reassemble. If Equipped with disc brakes remove pads and clean calliper, disc, and check pads for wear, reassemble and respace if required.
* Full Bike Check for tightness of bolts.
* Prepare of report sheet.
Cost = £50 = 2 hour work
C Service
* Strip down, clean and lubricate and refit new gear cables.
* Adjust headset, including re-grease.
* True wheels, retention spokes.
* Check Tyres for wear and inflate to correct pressure.
* Strip down wheels hubs, clean and Regrease.
* Remove Front/Rear Mechanicals Clean, Lubricate and Refit.
* Remove Crank Arms, Chain and Cassette, Clean, Check for wear and refit.
* If fitted with cantilever of v-brakes, Strip down Calliper, Re-grease and reassemble including new brake Cable. If Equipped with disc brakes remove pads and clean calliper, disc, and pads (check pads for wear). Clean and lubricate pistons system, re-bled and re-spacing calliper.
* Full Bike Check for tightness of bolts.
* Preparation of report sheet.
Cost = £75 = 2.5 hours work
